zone amp part 2
I made some measurements.
Output voltage 1.2 V and 8 Ohm load.
HF roll-off somewhere around 70 kHz.
LF roll-off around 35 Hz.
Distortion turned out to be quite high at 2.4%, it could be that the chip is not very happy with 15V power as the datasheet specifies +/- 16V as typical power supply.
Output voltage 1.2 V and 8 Ohm load.
LF roll-off around 35 Hz.
Distortion turned out to be quite high at 2.4%, it could be that the chip is not very happy with 15V power as the datasheet specifies +/- 16V as typical power supply.
Anyway, it was fun to build and to me it just sounds fine.
Comments
Post a Comment